50mA Micro actuator driver

This lightweight (0.15gr) PWM actuator driver compatible with all rc receiver's servo signal lines. Just solder thin wires to your receiver and actuator coil.

16gr micro Cessna 172 Skyhawk powered with Damntronics Micro 4Ah ESC, Damntronics Actuator drivers, Picooz main motor, Bluearrow 5gr 35Mhz Receiver and 1S 75mA LiPO battery
(sorry my personal site not english)

Features

Size : 10mm X 10 mm
Weight : 0.15 gr
Battery : 2 to 5Volt (1 Cell LiPO or 2-4 Cell NiMh/NiCd)
Current : 75mA Max.
Position Resolution : ±10 position from center (total 20)
Center Positioning : Automatic when Arming
Arming Time: 2 second
Arming Sound: 2 tone with actuator vibration
Auto Rearming: 2.5 second after signal lost or voltage drop detection
Low Voltage Treshold: 2 Volt
Suggested Actuator Resistance: 50-120 Ohm

Important Notice

This device sensitive to reverse polarity. Please double check the battery wires before power on.
Use good quality soldering iron with sharp tip for soldering.