Dual (pitch and yaw) 300°/s gyroscope with MEMs technology.
Useful for your DIY autopilot or stabiliser projects.

Two different analog outputs are provided for both the X and Z axes - one 1x amplified and the other 4x amplified.

A regulated voltage between 2.7 and 3.6VDC should be supplied to the power pins. We have the filtering circuits all set up; you'll just need to connect the outputs to an ADC, and you're ready to go.

This breakout board includes the gyro and all necessary filtering capacitors as shown. The 1x and 4x amplified outputs of both axes are connected to the 0.1" pitch headers, along with the power-down, self-test, high-pass filter reset, and power pins.

• two-axis (pitch and yaw)
• Complete range of full scale available (300°/s)
• Ultra stable over temperature
• Low noise level (0.01dps/√Hz)
• Amplified and unamplified outputs concurrently available
• Extended power supply range (2.7 to 3.6 V)
• Absolute angular rate output
• Internal low-pass filter
• Embedded self test
• Embedded power-down
• Sleep mode
• High shock survivability