A high quality and very tiny video splitter for the diversity transmitters or parallel ground screens and recorders.

This 2 channel video splitter which will allow you to share the signal from one single camera to 2 different transmitters.

for example;

• you can use 1200 and 800mhz transmitters same time for diversity receivers.
• Or you can use it on your ground station for splitting the video to VDR, goggles or maybe a second display for your friends.

You can supply your camera and transmitters over its 3 pin servo type connectors (1A max), the 3 wires are GND, Vsupply, Video Signal. 

Important!!!
The + trace is a pass through, meaning that all 3 devices are connected to it through the red wire in the middle of the servo cable. In case any of your devices operates on a different voltage, you should remove the red wire from that connector.

Specifications