Our shop is closed until 28 September 2018.
We are currently accepting orders but ship after the holiday,
Thanks for your patience...

2 Way Video Splitter (3-18v)

A high quality and very tiny video splitter for the diversity transmitters or parallel ground screens and recorders.

More details

£17.85

A high quality and very tiny video splitter for the diversity transmitters or parallel ground screens and recorders.

 

This 2 channel video splitter which will allow you to share the signal from one single camera to 2 different transmitters.

 

for example;

  • you can use 1200 and 800mhz transmitters same time for diversity receivers.
  • Or you can use it on your ground station for splitting the video to VDR, goggles or maybe a second display for your friends.

 

You can supply your camera and transmitters over its 3 pin servo type connectors (1A max), the 3 wires are GND, Vsupply, Video Signal. 

Important!!!
The + trace is a pass through, meaning that all 3 devices are connected to it through the red wire in the middle of the servo cable. In case any of your devices operates on a different voltage, you should remove the red wire from that connector.

 

Specifications  

 

Supply Voltage

3.3 - 18 volt (parallel on 3 ports)

Video System

75 ohm with SAG correction

Operating Temperature

-40 to +105 °C

Current Consumption

30mA

Video input voltage:75R

1.0Vp-p

Dimensions( L X W X H)

3mm X 18mm X 28mm

Weight

2.0 gram

 

Related Products