Our shop is closed until 28 September 2018.
We are currently accepting orders but ship after the holiday,
Thanks for your patience...

sLED v2 CANON RC Shutter

sLED v2 is unique, lightweight and robust Infrared RC shutter system for Canon DSLR machines.
You can use it for Video Start/Stop or Photo.

Compatible with whole EOS series CANON DSLR Machines

EOS 1D, EOS 3D, EOS 5D, EOS 7D, EOS 50D, EOS 60D, EOS 550D, EOS 600D, EOS 1100D, etc...

More details

£8.90

sLED v2 is unique, lightweight and robust Infrared RC shutter system for Canon DSLR machines.
You can use it for Video Start/Stop or Photo. 


NEW sLED v2 SERIES

Previous sLED shutters were using 5mm standard IR LEDs to emmitting the signals.
Our new sLED v2 boards are including onboard SMD IR LED for lighter, better and stronger design.
You can also attach it to IR window of your camera with a sticky tape.  


 



Weight: 4gr
Voltage: 3-7 volts
Current: 2mA
Cable Length: 30cm
Accepting Signal: 1-2ms PPM over servo line.

USING sLED

  • Just plug it to your receivers'a any empty channel.
  • Use a 3 position switch, knob, stick or logical switch for controling the modes.
  • Configure your Canon for IR Remote.
    You can find the remote control menu under DRIVE button of your xxD or xD series machines.
    If you are using xxxD series machine like 550D, you have to enable "video remote" mode from MENU button when video mode selected.

Control Modes
CENTER position: Idle mode of sLED
UP Position:  Photo Shot (works on Photo or video modes)
DOWN Position: Video Start/Stop (or 2 seconds delay on photo mode)

Canon RC Shutter Switch Positions

 

Compatible Models: 


Whole EOS series DSLR machines since 300D
EOS 1D
EOS 3D
EOS 5D (all models)

EOS 7D
EOS 50D
EOS 60D

EOS 550D
EOS 600D
EOS 1100D
EOS 300D, 300V, 300VQD, 300X, 350D (Rebel XT), 350D, 400D (Rebel XTi), 450 (Rebel XSi), 50/55, 10, 100, kiss III, kiss IIIL, EOS IX, 
IXUS jr/II/III, Sureshot, ELAN7, Rebel T1 Date, Rebel T2 Date, Z180u, Z155, Pro90 IS, 120, 370Z, G1, G2, G3, G4, G5, S70, S60, S1 IS, Pro 1

 

 

Note 1: Your model may not be included in the above list. Please check the manual of you camera to see whether it is compatible with IR video start/stop option. Our remote shutter compatible with RC-1 and RC-6 remote shutters of Canon.

 

Note 2: You should enable "IR remote" mode from your CANON's video menu before using this device.  You can find the remote control menu under DRIVE button of your xxD or xD series machines. If you are using xxxD series machine like 550D, you have to enable "video remote" mode from MENU button when video mode selected.

Related Products