Our shop is closed until 28 September 2018.
We are currently accepting orders but ship after the holiday,
Thanks for your patience...

sLED v2 Sony RC Shutter for A7,A7R,A6000,Nex-5 and others

sLED is unique, lightweight and robust Infrared RC shutter system for Sony A7, A7R, A6000, NEX-5 and other IR compatible Sony cameras

More details

£8.90

sLED is unique, lightweight and robust Infrared RC shutter system for Sony Nex5 / Nex 7 and other Sony IR Remote compatible cameras. You can use it for Video Start/Stop or Photo.

 

NEW sLED v2 SERIES

Previous sLED shutters were using 5mm standard IR LEDs to emmitting the signals.
Our new sLED v2 boards are including onboard SMD IR LED for lighter, better and stronger design.
You can also attach it to IR window of your camera with a sticky tape.  

Customer Video from Brook Dain

 

Weight: 4gr
Voltage: 3-7 volts
Current: 2mA
Cable Length: 30cm
Accepting Signal: 1-2ms PPM over servo line.

USING sLED

  • Just plug it to your receivers'a any empty channel.
  • Use a 3 position switch, knob, stick or logical switch for controling the modes.
  • Configure your SONY for IR Remote. 
    You can find the remote control menu under DRIVE MODES of Nex5 machines.
    If you are using other models please check the menu system to enable IR Remote mode.


Control Modes
CENTER position: Idle mode of sLED
UP Position:  Photo Shot
DOWN Position: Video Start/Stop

Sony RC Shutter Switch Positions

 

Compatible Models: 


Whole ALPHA series SONY cameras that including an IR port.

  • A7
  • A7R
  • A7S
  • A6000
  • A33
  • A65
  • A77
  • A99
  • A900
  • A700
  • A580
  • A560
  • A550
  • A500
  • A450
  • A390
  • A380
  • A330
  • A230
  • NEX-7
  • NEX-6
  • NEX-5T
  • NEX-5N
  • NEX-5 

Note 1: Your model may not be included in the above list. Please check the manual of you camera to see whether it is compatible with IR video start/stop option. 

 

Note 2: You should enable "IR remote" mode from your Sony's video menu before using this device.  You can find the remote control menu under DRIVE MODES of your Nex5 machines. If you are using other models please check the menu system to enable IR Remote mode.

Related Products